 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Embedded Power for Business-Critical Continuity NXI100 Series Single output Rev.03.23.07 NXI100 1 of 4 Input Voltage: 12VDC # of Outputs: Single Special Features * Designed for VRM9.0 and VRM9.1 specification * Low profile: 1.15 inches including mating connector * Microprocessor voltage identification input * 5 Bit VID input * 1.10 Vdc to 1.85 Vdc in 25 mV steps * Up to 50 A/s load transient no load to full load, recovery within 50 s * Democratic current sharing, no need for master/slave configuration * High efficiency: 87% typical @ Vin = 12 V, Vout = 1.5 V, Iout = 60 A * Available RoHS compliant * 2 year warranty The NXI100 non-isolated dc-dc converter simplifies the application of Intel Xeon(TM) or Pentium(R)4 processors by providing a purpose-designed, point-of-load, power management solution for low-profile applications. Capable of delivering 81 A, and meeting the exceptional transient response requirements of these loads, the converter comes in a versatile, PCB-pluggable form. Artesyn utilizes advanced circuit techniques, component selection and state-of-the-art thermal packaging, to deliver reliable high power density. Multi-phase power conversion provides industry-leading conversion efficiency without adding unneccesary complexity, and NXI100 meets the precise regulation specifications of VRM9.0/9.1 without expensive external components. An active circuit guarantees the current sharing specification is met during static or dynamic loading conditions. Embedded Power for Business-Critical Continuity Specifications All specifications are typical at nominal input, full load at 25C unless otherwise stated. Rev.03.23.07 NXI100 2 of 4 OUTPUT SPECIFICATIONS Voltage adjustability Output setpoint accuracy Vout Ripple and noise (See Note 1) Transient response peak dev. settling time Short circuit protection INPUT SPECIFICATIONS Input voltage range Input current 12 Vin nominal Operating No load OUTEN low 11-12.6 Vdc 13.6 A 300 mA 40 mA max. 9.9 V typ. 8.5 V typ. Nominal line 10 ms 20 MHz bandwidth (See Note 2) See table 0.8% 15 mV pk-pk 50 mV 25 s Continuous current automatic recovery GENERAL CHARACTERISTICS Efficiency Switching frequency Standards Weight MTBF Mating connector ENVIRONMENTAL SPECIFICATIONS Maximum temperature shock Temperature shock Humidity Altitude Open circuit voltage Ref. to -input 5 Vdc 0.8 Vdc max. Shock Operating Operating Non-operating Operating Storage Operating Storage Operational Non-operational Vibration (See Note 5) Electrostatic discharge (See Note 6) Thermal performance (See Note 7) Operational and non-operational Operating Non-operating Operating ambient temperature Non-operating 5 C/10 min. 10 C/hour 20 C/hour 85% RH 95% RH 10,000 feet max. 50,000 feet max. 30 G 11 ms, half sine wave 50 G 11 ms, half sine wave 0.02 G2/Hz max. ESD 15 kV ESD 25 kV 0 C to +60 C -40 C to +100 C Telcordia SR-332 1.5 V output @ 60 A 1.7 V output @ 60 A Fixed (See Note 3) 87% 87% 990 kHz 94V-0 flammability rating 40 g (1.41 oz) 850,000 hours (See Note 4) UVLO turn ON voltage UVLO turn OFF Voltage Start-up time OUTEN Logic compatibility ON OFF Embedded Power for Business-Critical Continuity Specifications Contd. Rev.03.23.07 NXI100 3 of 4 INPUT VOLTAGE 12 Vdc OUTPUT VOLTAGE 1.1-1.85 Vdc OVP 120% of VID setting OUTPUT CURRENT (MIN) 0A OUTPUT CURRENT (MAX.) 81 A EFFICIENCY (TYP.) 87% REGULATION LOAD 0.95 mV/A MODEL NUMBER (9,10) NXI100-12P1V8CY TABLE 1: PIN CONNECTIONS PIN NO. FUNCTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Vin+ Vin+ Vin+ Vin+ Reserved Key VID3 VID1 Reserved PWRGD Vo senReserved VoVo+ VoVo+ VoVo+ VoVo+ VoVo+ VoVo+ VoVo+ VoVo+ VoVo+ VoPIN NO. FUNCTION 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 VinVinVinVinVRM-pres VID4 VID2 VID0 Ishare OUTEN Vo sen+ Reserved Vo+ Vo+ VoVo+ VoVo+ VoVo+ VoVo+ VoVo+ VoVo+ VoVo+ VoVo+ VoVID4 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 TABLE 2: VOLTAGE IDENTIFICATION (VID) CODES VID3 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 VID2 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 VID1 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 VID0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 VDAC Output off 1.100 1.125 1.150 1.175 1.200 1.225 1.250 1.275 1.300 1.325 1.350 1.375 1.400 1.425 1.450 1.475 1.500 1.525 1.550 1.575 1.600 1.625 1.650 1.675 1.700 1.725 1.750 1.775 1.800 1.825 1.850 Embedded Power for Business-Critical Continuity Rev.03.23.07 NXI100 4 of 4 Americas 0.160 (4.06) REF 2.320 (58.93) REF 5810 Van Allen Way Carlsbad, CA 92008 USA Telephone: +1 760 930 4600 Facsimile: +1 760 930 0698 1 62 31 32 0.250 (6.35) REF Europe (UK) Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX United Kingdom Telephone: +44 (0) 1384 842 211 Facsimile: +44 (0) 1384 843 355 0.062 0.007 THICK FR-4 2-Sided CKT BD W/Gold Plated 30" Connector Fingers 3.200 (81.28) REF 3.800 (96.52) 0.307 (7.80) 3.186 0.002 (80.92 0.05) 0.500 max. (12.70) Asia (HK) 0.855 (21.72) 0.305 (7.75) 62 0.042 (1.07) Typ. Key slot 0.100 (2.54) 0.265 (6.73) REF 0.820 max. 32 (20.83) 8.050 (1.27) REF 1.143 (29.03) 16th - 17th Floors, Lu Plaza 2 Wing Yip Street, Kwun Tong Kowloon, Hong Kong Telephone: +852 2176 3333 Facsimile: +852 2176 3888 CC LL For global contact, visit: 0.093 (2.36) 30 EQ Spaces @ 0.100 (2.54) each Equals 3.000 (76.20) TOL Non-Accum www.powerconversion.com Dimensions in Inches (mm) Tolerances (unless otherwise specified) 2 Place 0.02 technicalsupport@powerconversion.com While every precaution has been taken to ensure accuracy and completeness in this literature, Emerson Network Power assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. Figure 1: Mechanical Drawing Notes 1 15 mV pk-pk ripple 8 x 560 F/4 V OSCON and 10 x 4.7 F/6.3 V MLCC'st on the output. Vin = 12 V, Vout = 1.5 V, Iout = 60 A. 2 125 mV peak deviation when slewing load from no load to full load at 50 A/s. Oscon type low impedance caps required across output. 3 Each phase operates at a fixed 330 kHz. Effective fundamental output frequency is 990 kHz / 3 phases each at 330 kHz interleaved. 4 Recommended mating connector is AMP 1364125-1 or equivalent. 5 From 5 Hz to 20 Hz, maintaining 0.02 G2/Hz from 20 Hz to 500 Hz, all axes. 6 Test performed in end use equipment. 7 Refer to thermal de-rating curves found in the long form datasheet. 8 VID code lower than 1.25 V, use 5 A as minimum load. 9 The `Y' suffix indicates that these parts are TSE RoHS 5/6 (non Pb-free) compliant. 10 NOTICE: Some models do not support all options. Please contact your local Artesyn representative or use the on-line model number search tool at http://www.artesyn.com/powergroup/products.htm to find a suitable alternative. Emerson Network Power. The global leader in enabling business-critical continuity. AC Power Connectivity DC Power Embedded Power Inbound Power Integrated Cabinet Solutions Outside Plant Precision Cooling Site Monitoring and Services EmersonNetworkPower. com Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. (c)2007 Emerson Electric Co. |
Price & Availability of NXI100
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |